Joseba Mendiguren

Senior Lecturer

Publications


I am a strong advocate for open access. In the top right corner, you'll find a link to my university profile, where you can access my repository. If you come across any publication that's not accessible, please feel free to reach out to me via email..


Characterization of the heat transfer coefficient at near solidus forming condition using columnar pressing test


Muhammad Sajjad, Julen Agirre, Gorka Plata, Jokin Lozares, Joseba Mendiguren

The International Journal of Advanced Manufacturing Technology, 2024 Oct


Tool surface texturing by shot peening: initial results and lessons learned


Eneko Sáenz de Argandoña, Markel Mendez, Joseba Mendiguren, Alaitz Zabala

IOP Conference Series: Materials Science and Engineering, vol. 1307, IOP Publishing, 2024 May, p. 012017


Anisotropic plasticity and fracture modelling of cold rolled AA5754


Borja Erice, Bernard Rolfe, Joseba Mendiguren

Engineering Fracture Mechanics, vol. 289, 2023


In-situ analysis of the elastic-plastic characteristics of high strength dual-phase steel


Simon Vitzthum, Joana Rebelo Kornmeier, Michael Hofmann, Maximilian Gruber, Roman Norz, Emad Maawad, Joseba Mendiguren, Wolfram Volk

Materials Science and Engineering: A, vol. 857, 2022


Numerical study of advanced friction modelling for sheet metal forming: Influence of the die local roughness


Alaitz Zabala, Eneko Sáenz de Argandoña, Daniel Cañizares, Iñigo Llavori, Nagore Otegi, Joseba Mendiguren

Tribology International, vol. 165, 2022


Plasticity evolution of an aluminum-magnesium alloy under abrupt strain path changes


Junhe Lian, Wenqi Liu, Xabier Gastañares, Rongfei Juan, Joseba Mendiguren

International Journal of Material Forming, vol. 15, 2022


Post-forming, electro-plastic effect internal stress reduction in AA5754 aluminium alloy


Wenqi Liu, Nagore Otegi, Ana Orallo, Manex Barrenetxea, Iosu Aizpuru, Junhe Lian, Joseba Mendiguren

Materials Science and Engineering: A, vol. 852, 2022


A coupled 3D wear and fatigue numerical procedure: Application to fretting problems in ultra-high strength steel wires


I. Llavori, A. Zabala, J. Mendiguren, X. Gómez

International Journal of Fatigue, vol. 143, 2021


Contact pressure and sliding velocity ranges in sheet metal forming simulations


Joseba Cillaurren, Lander Galdos, Mario Sanchez, Alaitz Zabala, Eneko Saenz de Argandoña, Joseba Mendiguren

ESAFORM 2021 - 24th International Conference on Material Forming, 2021


Contact pressure, sliding velocity and viscosity dependent friction behavior of lubricants used in tube hydroforming processes


Lander Galdos, Nagore Otegi, Joseba Mendiguren, Javier Trinidad, Eneko Saenz de Argandoña

ESAFORM 2021 - 24th International Conference on Material Forming, 2021


Initiation of dynamic recrystallization of as-cast N08028 alloy


Elena Mora, Aitor Navarro, Elena Silveira, Cecilia Poletti, Joseba Mendiguren, Iñaki Hurtado

ESAFORM 2021 - 24th International Conference on Material Forming, 2021


New drawbead tester and numerical analysis of drawbead closure force


Imanol Gil, Joseba Mendiguren, Lander Galdos, Endika Mugarra, Eneko Saenz de Argandoña

International Journal of Advanced Manufacturing Technology, vol. 116, 2021, pp. 1855 – 1869


Simulation of Cold Forging Processes Using a Mixed Isotropic-Kinematik Hardening Model


Lander Galdos, Julen Agirre, Nagore Otegi, Joseba Mendiguren, Eneko Saenz de Argandoña

Minerals, Metals and Materials Series, 2021, pp. 773 – 787


The interaction between the sheet/tool surface texture and the friction/galling behaviour on aluminium deep drawing operations


Alaitz Zabala, Lander Galdos, Chris Childs, Iñigo Llavori, Andrea Aginagalde, Joseba Mendiguren, Eneko Saenz de Argandoña

Metals, vol. 11, 2021


Aluminum springback reduction by post-forming electric pulses


Ana Orallo, Javier Trinidad, Lander Galdos, Eneko Sáenz de Argandoña, Joseba Mendiguren

Procedia Manufacturing, vol. 47, 2020, pp. 1387 – 1391


A review of the effects of cyclic contact loading on fretting fatigue behavior


F. Abbasi, G.H. Majzoobi, J. Mendiguren

Advances in Mechanical Engineering, vol. 12, 2020


A simple device to measure bend limit of sheet metals


A. Deole, N. Etxebarria, J. Mendiguren, A. Ilinich, M. Weiss

IOP Conference Series: Materials Science and Engineering, vol. 967, 2020


Experimental and numerical simulation investigation on deep drawing process of inconel 718 with and without intermediate annealing thermal treatments


Unai Ulibarri, Lander Galdos, Eneko Sáenz de Argandoña, Joseba Mendiguren

Applied Sciences (Switzerland), vol. 10, 2020


Strain rate effect on the fracture behavior of the AA5754 aluminum alloy


Maddi Bueno, Lander Galdos, Eneko Sáenz de Argandoña, Matthias Weiss, Bernard Rolfe, Yanshan Lou, Joseba Mendiguren

Procedia Manufacturing, vol. 47, 2020, pp. 1264 – 1269


The effect of material surface roughness in aluminum forming


Eneko Sáenz de Argandoña, Alaitz Zabala, Lander Galdos, Joseba Mendiguren

Procedia Manufacturing, vol. 47, 2020, pp. 591 – 595


The influence of the kinematic hardening on the FEM simulation of tension levelling process


Aitor Garcia, Javier Trinidad, Nagore Otegi, Joseba Mendiguren, Eneko Saenz de Argandoña, Elena Silvestre, Lander Galdos

Procedia Manufacturing, vol. 47, 2020, pp. 1381 – 1386


Towards the automation of the die spotting process: Contact blue pattern decryption


Alaitz Zabala, Iñigo Llavori, Eneko Sáenz de Argandoña, Joseba Mendiguren

Journal of Manufacturing Processes, vol. 58, 2020, pp. 1285 – 1296


A microstructural based constitutive approach for simulating hot deformation of Ti6Al4V alloy in the α + β phase region


Paul M. Souza, Joseba Mendiguren, Qi Chao, Hossein Beladi, Peter D. Hodgson, Bernard Rolfe

Materials Science and Engineering: A, vol. 748, 2019, pp. 30 – 37


Numerical prediction of force and energy consumption in roll forming processes


Eneko Saenz De Argandoña, Joseba Mendiguren, Lander Galdos, Nagore Otegi, Javier Trinidad, Alain Armendariz

AIP Conference Proceedings, vol. 2113, 2019


Numerical study on the effect of microstructure on the mechanical behaviour of dual-phase steels


Ángela Mangas, Iñaki Eguía, Jon Ezkerra, Joseba Mendiguren, Zaloa Arechabaleta

AIP Conference Proceedings, vol. 2113, 2019


Drawbead uplift force analytical model for deep drawing operations


I. Gil, L. Galdos, J. Mendiguren, N. Otegi, E. Saenz De Argandona

Journal of Physics: Conference Series, vol. 1063, 2018


Hardening prediction of diverse materials using the Digital Image Correlation technique


Julen Agirre, Lander Galdos, Eneko Saenz de Argandoña, Joseba Mendiguren

Mechanics of Materials, vol. 124, 2018, pp. 71 – 79


Improving the prediction of the final part geometry in high strength steels U drawing by means of advanced material and friction models


Eneko Saenz De Argandoña, Joseba Mendiguren, Irune Otero, Endika Mugarra, Nagore Otegi, Lander Galdos

AIP Conference Proceedings, vol. 1960, 2018


Influence of roll levelling on material properties and postforming springback


Lander Galdos, Joseba Mendiguren, Eneko Saenz De Argandoña, Nagore Otegi, Elena Silvestre

AIP Conference Proceedings, vol. 1960, 2018


On the accurate characterization of the drawbead up-lift forces


I. Gil, L. Galdos, N. Otegi, J. Mendiguren, E. Saenz De Argandona

IOP Conference Series: Materials Science and Engineering, vol. 418, 2018


On the plastic flow rule formulation in anisotropic yielding aluminium alloys


Joseba Mendiguren, Lander Galdos, Eneko Saenz de Argandoña

International Journal of Advanced Manufacturing Technology, vol. 99, 2018, pp. 255 – 274


Press hardening of alternative materials: conventional high- strength steels


Joseba Mendiguren, Nuria Herrero-Dorca, Eneko Saenz de Argandoña, Lander Galdos

International Journal of Material Forming, vol. 11, 2018, pp. 663 – 670


Bending behaviour and oil canning in roll forming a steel channel


Matthias Weiss, Buddhika Abeyrathna, Desinghe Shiromani Gangoda, Joseba Mendiguren, Henry Wolfkamp

International Journal of Advanced Manufacturing Technology, vol. 91, 2017, pp. 2875 – 2884


Characterization of Ti64 forging friction factor using ceramic coatings and different contact conditions


Lander Galdos, Eneko Saenz De Argandoña, Joseba Mendiguren, Ritanjali Sethy, Julen Agirre

Procedia Engineering, vol. 207, 2017, pp. 2239 – 2244


Cost efficiency of the non-associative flow rule simulation of an industrial component


Lander Galdos, Eneko Saenz De Argandoña, Joseba Mendiguren

AIP Conference Proceedings, vol. 1896, 2017


Evolution of elastic modulus in roll forming


A. Abvabi, J. Mendiguren, A. Kupke, B. Rolfe, M. Weiss

International Journal of Material Forming, vol. 10, 2017, pp. 463 – 471


Friction and Heat Transfer Coefficient Determination of Titanium Alloys during Hot Forging Conditions


Ritanjali Sethy, Lander Galdos, Joseba Mendiguren, Eneko Sáenz de Argandoña

Advanced Engineering Materials, vol. 19, 2017


Hole expansion test of third generation steels


Julen Agirre, Joseba Mendiguren, Lander Galdos, Eneko Sáenz De Argandoña

AIP Conference Proceedings, vol. 1896, 2017


Numerical simulation of the roll levelling of third generation fortiform 1050 steel using a nonlinear combined hardening material model


L. Galdos, E Saenz De Argandona, J. Mendiguren, E. Silvestre

Journal of Physics: Conference Series, vol. 896, 2017


Numerical simulation of U-Drawing test of Fortiform 1050 steel using different material models


Lander Galdos, Eneko Saenz De Argandoña, Joseba Mendiguren, Imanol Gil, Unai Ulibarri, Endika Mugarra

Procedia Engineering, vol. 207, 2017, pp. 137 – 142


U-drawing of Fortiform 1050 third generation steels. Numerical and experimental results


E. Saenz De Argandona, L. Galdos, J. Mendiguren, I. Otero, E. Mugarra

Journal of Physics: Conference Series, vol. 896, 2017


An analytical model for web-warping in variable width flexible roll forming


Jingsi Jiao, Bernard Rolfe, Joseba Mendiguren, Matthias Weiss

International Journal of Advanced Manufacturing Technology, vol. 86, 2016, pp. 1541 – 1555


Energy efficient servo controlled roll levelling machines


Eneko Sáenz De Argandoña, Elena Silvestre, Daniel Garcia, Joseba Mendiguren, Lander Galdos

Key Engineering Materials, vol. 716, 2016, pp. 413 – 419


Experimental characterization of the heat transfer coefficient under different close loop controlled pressures and die temperatures


Joseba Mendiguren, Rafael Ortubay, Eneko Saenz De Argandonã, Lander Galdos

Applied Thermal Engineering, vol. 99, 2016, pp. 813 – 824


Friction characterisation in levelling processes


Unai Ulibarri Hernández, Joseba Mendiguren, Eneko Sáenz de Argandoña, Lander Galdos, Elena Silvestre, Imanol Gil

Advances in Materials and Processing Technologies, vol. 2, 2016, pp. 503 – 513


Hot stamping of AA7075 aluminum sheets


J. Mendiguren, .E Saenz De Argandona, L. Galdos

IOP Conference Series: Materials Science and Engineering, vol. 159, 2016


Identification of friction coefficient in forging processes by means t-shape tests in high temperature


Ritanjali Sethy, Lander Galdos, Joseba Mendiguren, Eneko Sáenz De Argandoña

Key Engineering Materials, vol. 716, 2016, pp. 165 – 175


Influence of material and tribological modelling on the prediction of big size automotive components springback


Imanol Gil, Endika Mugarra, Julen Aguirre, Joseba Mendiguren, Eneko Sáenz De Argandoña, Lander Galdos

Key Engineering Materials, vol. 716, 2016, pp. 713 – 718


Influence of material's hardening behaviour of DP1000 on numerical springback prediction


Imanol Gil, Elena Silvestre, Lander Galdos, Joseba Mendiguren, Eneko Sáenz De Argandoña, Eric Hug

AIP Conference Proceedings, vol. 1769, 2016


Influence of the pressure dependent coefficient of friction on deep drawing springback predictions


Imanol Gil, Joseba Mendiguren, Lander Galdos, Endika Mugarra, Eneko Saenz de Argandoña

Tribology International, vol. 103, 2016, pp. 266 – 273


Influence of the pressure dependent coefficient of friction on deep drawing springback predictions


Imanol Gil, Lander Galdos, Joseba Mendiguren, Endika Mugarra, Eneko Sáenz De Argandoña

AIP Conference Proceedings, vol. 1769, 2016


Influence of the tool temperature increment on the coefficient of friction behavior on the deep drawing process of HSS


I. Gil, L. Galdos, E. Mugarra, J. Mendiguren, E Saenz De Argandoña

IOP Conference Series: Materials Science and Engineering, vol. 159, 2016


Investigation of influencing factors on friction during ring test in hot forging using FEM simulation


Ritanjali Sethy, Lander Galdos, Joseba Mendiguren, Eneko Sáenz De Argandoña

AIP Conference Proceedings, vol. 1769, 2016


Press hardening of alternative high strength aluminium and ultra-high strength steels


Joseba Mendiguren, Rafael Ortubay, Xabier Agirretxe, Lander Galdos, Eneko Sáenz De Argandoña

AIP Conference Proceedings, vol. 1769, 2016


Roll levelling semi-analytical model for process optimization


E. Silvestre, D. Garcia, L. Galdos, E. Saenz De Argandoña, J. Mendiguren

Journal of Physics: Conference Series, vol. 734, 2016


Sensitivity analysis on an AC600 aluminum skin component


J. Mendiguren, J. Agirre, E. Mugarra, L. Galdos, E. Saenz De Argandoña

Journal of Physics: Conference Series, vol. 734, 2016


An analytical approach to predict web-warping and longitudinal strain in flexible roll formed sections of variable width


Jingsi Jiao, Bernard Rolfe, Joseba Mendiguren, Matthias Weiss

International Journal of Mechanical Sciences, vol. 90, 2015, pp. 228 – 238


Comparison of the hardening behaviour of different steel families: From mild and stainless steel to advanced high strength steels


E. Silvestre, J. Mendiguren, L. Galdos, E. Sáenz De Argandoña

International Journal of Mechanical Sciences, 101-102, 2015, pp. 10 – 20


Comparison of three methods for material hardening parameter identification under cyclic tensioncompression loadings: Roll levelling case study


Elena Silvestre, Eneko Sáenz De Argandoña, Lander Galdos, Joseba Mendiguren

Key Engineering Materials, 651-653, 2015, pp. 957 – 962


Determination of heat transfer coefficients for different initial tool temperatures and closed loop controlled constant contact pressures


Joseba Mendiguren, Rafael Ortubay, Xabier Agirretxe, José Miguel Martín, Lander Galdos, Eneko Sáenz De Argandoña

Key Engineering Materials, 651-653, 2015, pp. 1537 – 1542


Determination of heat transfer coefficients under closed loop controlled constant contact pressures


Lander Galdos, Eneko Sáenz De Argandoña, Joseba Mendiguren, Rafael Ortubay, Xabier Agirretxe, José Miguel Martín

Computer Methods in Materials Science, vol. 15, 2015, pp. 58 – 64


Effects of Microstructure on the Variation of the Unloading Behavior of DP780 Steels


Erik J. Pavlina, Chengjiang Lin, Joseba Mendiguren, Bernard F. Rolfe, Matthias Weiss

Journal of Materials Engineering and Performance, vol. 24, 2015, pp. 3737 – 3745


Elastic behaviour characterisation of TRIP 700 steel by means of loading-unloading tests


Joseba Mendiguren, Fernando Cortés, Xabier Gómez, Lander Galdos

Materials Science and Engineering: A, vol. 634, 2015, pp. 147 – 152


Improvement of accuracy in a free bending test for material characterization


Joseba Mendiguren, Armin Abvabi, Bernard Rolfe, Matthias Weiss

International Journal of Mechanical Sciences, vol. 103, 2015, pp. 288 – 296


Numerical simulation of the roll levelling of DP1000 steel using a nonlinear combined hardening material model


Elena Silvestre, Eneko Sáenz De Argandoña, Lander Galdos, Joseba Mendiguren

Computer Methods in Materials Science, vol. 15, 2015, pp. 44 – 50


On the definition of an kinematic hardening effect graph for sheet metal forming process simulations


Joseba Mendiguren, Bernard Rolfe, Matthias Weiss

International Journal of Mechanical Sciences, vol. 92, 2015, pp. 109 – 120


Room temperature forming of AA7075 aluminum alloys: W-Temper process


Eneko Sáenz De Argandoña, Lander Galdos, Rafael Ortubay, Joseba Mendiguren, Xabier Agirretxe

Key Engineering Materials, 651-653, 2015, pp. 199 – 204


Tailor tempering and hot-spotting of press hardened boron steels


Lander Galdos, Eneko Saenz De Argandoña, Joseba Mendiguren, Nuria Herrero, Rafeel Ortubay, Xabier Agirretxe, José Miguel Martín

Key Engineering Materials, 651-653, 2015, pp. 789 – 795


W-temper forming of AA7075 aluminum alloys as an alternative to the warm and hot stamping


Eneko Sáenz De Argandoña, Lander Galdos, Rafael Ortubay, Joseba Mendiguren, Xabier Agirretxe

Computer Methods in Materials Science, vol. 15, 2015, pp. 51 – 57


Characterization of a dual phase steel using tensile and free bending tests


Joseba Mendiguren, Stijn Hanselman, Eisso Atzema, Peter Hodgson, Bernard Rolfe, Matthias Weiss

AIP Conference Proceedings, vol. 1567, 2014, pp. 659 – 662


Springback investigation in roll forming of a V-section


Akbar Abvabi, Joseba Mendiguren, Bernard Rolfe, Matthias Weiss

Applied Mechanics and Materials, vol. 553, 2014, pp. 643 – 648


Testing and modeling of roll levelling process


Elena Silvestre, Eneko Sáenz De Argandoña, Lander Galdós, Joseba Mendiguren

Key Engineering Materials, 611-612, 2014, pp. 1753 – 1762


The effect of tooling design parameters on web-warping in the flexible roll forming of UHSS


Jingsi Jiao, Bernard Rolfe, Joseba Mendiguren, Lander Galdos, Matthias Weiss

AIP Conference Proceedings, vol. 1567, 2014, pp. 892 – 895


An extended elastic law to represent non-linear elastic behaviour: Application in computational metal forming


Joseba Mendiguren, Juan J. Trujillo, Fernando Cortés, Lander Galdos

International Journal of Mechanical Sciences, vol. 77, 2013, pp. 57 – 64


Influence of the number of tensile/compression cycles on the fitting of a mixed hardening material model: Roll levelling process case study


Elena Silvestre, Joseba Mendiguren, Lander Galdos, Eneko Sáenz De Argandoña

Key Engineering Materials, 554-557, 2013, pp. 2375 – 2387


Strain path's influence on the elastic behaviour of the TRIP 700 steel


J. Mendiguren, F. Cortés, L. Galdos, S. Berveiller

Materials Science and Engineering: A, vol. 560, 2013, pp. 433 – 438


A generalised fractional derivative model to represent elastoplastic behaviour of metals


Joseba Mendiguren, Fernando Cortés, Lander Galdos

International Journal of Mechanical Sciences, vol. 65, 2012, pp. 12 – 17


Influence of material's yield strength on the kinematic hardening of steels


Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, Elena Silvestre

Steel Research International, SPL. ISSUE, 2012, pp. 967 – 970


Ludwik's model parameter identification for v-bending simulations with Ti64 and MS1200


J. Mendiguren, L. Galdos, E. Sáenz De Argandoña, E. Silvestre

Key Engineering Materials, 504-506, 2012, pp. 889 – 894


Roll levelling numerical simulation using a nonlinear mixed hardening material model


Elena Silvestre, Joseba Mendiguren, Eneko Sáenz de Argandoña, Lander Galdos

Steel Research International, SPL. ISSUE, 2012, pp. 1295 – 1298


Tools
Translate to